We hope you'll join us for our 4/23 webinar on using data tables to apply reference ranges and AE codes in OC4. For more information and to register, visit https://register.gotowebinar.com/register/2882170018956684555

Show - hide problems when used in groups

We are trying to use the new show/hide feature.
In the attached excel sheet on line 16 the item PH_DIAGNOSECODE_OTHER has item display status = hide, and the condition to display it is:

PH_DIAGNOSECODE,7,show if PH_DIAGNOSECODE is Other

This does not happen, the field is not shown even when the diagnosecode = 7.

The CRF and an image how it works, is attached.
Thanks, Cuneyt.
--
Cuneyt Parlayan
Datamanager
Department of Pathology
Room: ZH 0 E 50
VU University Medical Center
Amsterdam
phone: +31 20 4444025
Attachments:
showhidenotworkingproperlyingroups.zip 41.3 KB

Comments

  • GerbenRienkGerbenRienk Posts: 810 ✭✭✭
    Hi Cuneyt,
    I think you can not use simple_conditional_display on items in a repeating
    group.
    However you can write a rule with a ShowAction and this works fine on
    items in a RepeatingGroup.
    You can find an example on
    http://www.trialdatasolutions.com/tds/howto/showhidemulti.jsp
    Hope this helps,
    Gerben Rienk
    > > We are trying to use the new show/hide feature.
    > > In the attached excel sheet on line 16 the item PH_DIAGNOSECODE_OTHER has
    > > item display status = hide, and the condition to display it is:
    > >
    > > PH_DIAGNOSECODE,7,show if PH_DIAGNOSECODE is Other
    > >
    > > This does not happen, the field is not shown even when the diagnosecode =
    > > 7.
    > >
    > > The CRF and an image how it works, is attached.
    > > Thanks, Cuneyt.
    > >
    > >
    > > --
    > > Cuneyt Parlayan
    > >
    > > Datamanager
    > > Department of Pathology
    > > Room: ZH 0 E 50
    > > VU University Medical Center
    > > Amsterdam
    > > phone: +31 20 4444025
    > >
  • ccollinsccollins Posts: 379 admin
    Gerben/Cuneyt,
    Per your observation "I think you can not use simple_conditional_display
    on items in a repeating group."
    This functionality will be supported in the next maintenance release
    (3.1.2 -
    https://issuetracker.openclinica.com/roadmap_page.php?version_id=54).
    See issue #10881 for more detail -
    https://issuetracker.openclinica.com/view.php?id=10881.
    Best,
    Cal
    -----Original Message-----
    [mailto:[email protected]] On Behalf Of Gerben Rienk Visser
    Sent: Monday, August 29, 2011 11:38 AM
    To: [email protected]
    Subject: Re: [Users] Show - hide problems when used in groups
    Hi Cuneyt,
    I think you can not use simple_conditional_display on items in a
    repeating
    group.
    However you can write a rule with a ShowAction and this works fine on
    items in a RepeatingGroup.
    You can find an example on
    http://www.trialdatasolutions.com/tds/howto/showhidemulti.jsp
    Hope this helps,
    Gerben Rienk
    > > We are trying to use the new show/hide feature.
    > > In the attached excel sheet on line 16 the item PH_DIAGNOSECODE_OTHER
    has
    > > item display status = hide, and the condition to display it is:
    > >
    > > PH_DIAGNOSECODE,7,show if PH_DIAGNOSECODE is Other
    > >
    > > This does not happen, the field is not shown even when the
    diagnosecode =
    > > 7.
    > >
    > > The CRF and an image how it works, is attached.
    > > Thanks, Cuneyt.
    > >
    > >
    > > --
    > > Cuneyt Parlayan
    > >
    > > Datamanager
    > > Department of Pathology
    > > Room: ZH 0 E 50
    > > VU University Medical Center
    > > Amsterdam
    > > phone: +31 20 4444025
    > >
  • parlayanparlayan Posts: 139
    Gerben/Cal,
    Thanks, Cuneyt
    On Wed, Aug 31, 2011 at 5:22 AM, Cal Collins wrote:
    Gerben/Cuneyt,
    Per your observation "I think you can not use simple_conditional_display
    on items in a repeating group."
    This functionality will be supported in the next maintenance release
    (3.1.2 -
    https://issuetracker.openclinica.com/roadmap_page.php?version_id=54).
    See issue #10881 for more detail -
    https://issuetracker.openclinica.com/view.php?id=10881.
    Best,
    Cal
    -----Original Message-----
    [mailto:[email protected]] On Behalf Of Gerben Rienk Visser
    Sent: Monday, August 29, 2011 11:38 AM
    To: [email protected]
    Subject: Re: [Users] Show - hide problems when used in groups
    Hi Cuneyt,
    I think you can not use simple_conditional_display on items in a
    repeating
    group.
    However you can write a rule with a ShowAction and this works fine on
    items in a RepeatingGroup.
    You can find an example on
    http://www.trialdatasolutions.com/tds/howto/showhidemulti.jsp
    Hope this helps,
    Gerben Rienk
    > We are trying to use the new show/hide feature.
    > In the attached excel sheet on line 16 the item PH_DIAGNOSECODE_OTHER
    has
    > item display status = hide, and the condition to display it is:
    >
    > PH_DIAGNOSECODE,7,show if PH_DIAGNOSECODE is Other
    >
    > This does not happen, the field is not shown even when the
    diagnosecode =
    > 7.
    >
    > The CRF and an image how it works, is attached.
    > Thanks, Cuneyt.
    >
    >
    > --
    > Cuneyt Parlayan
    >
    > Datamanager
    > Department of Pathology
    > Room: ZH 0 E 50
    > VU University Medical Center
    > Amsterdam
    > phone: +31 20 4444025
    >
This discussion has been closed.