We hope you'll join us for our 4/23 webinar on using data tables to apply reference ranges and AE codes in OC4. For more information and to register, visit https://register.gotowebinar.com/register/2882170018956684555

Performance issues in OpenClinica 3.1.2

124»

Comments

  • mx8866mx8866 Posts: 109
    Hi Krister,
    Thank you so much for thinking about my problem. I do not know what does this mean:
    But first of all I would try to get rid of the division of form 1 in two depending on the selection of Other
    Maybe you send me a mock attachment picture?
    This form is used for initial 24 hrs admission. But it might be in two days. That is why I left the DAY there.
    Thanks a million for your advice
    May
    -----Original Message-----
    Sent: Saturday, February 04, 2012 10:47 AM
    To: [email protected]
    Subject: Re: [Users] Performance issues in OpenClinica 3.1.2
    Hi May,
    I have loaded your form on a much faster device and tested it with 20 patients. The performance was still excellent. The form opened in about 1 second and saved in 4-5 seconds regardless of 1 or 20 patients.
    Have you had a chance to redesign the form yet? I have looked into it but it is difficult when you have not seen the protocol. But first of all I would try to get rid of the division of form 1 in two depending on the selection of Other Location. The I would make each day a separate event, that mean that you could skip the date for each record....would that work?
    But as I said I'm not sure as I said. How many days is the study with these recording going to continue.
    Best regards
    Krister
    -----Original Message-----
    On Behalf Of Xi, Xuemei
    Sent: 30 January 2012 14:29
    To: [email protected]
    Subject: Re: [Users] Performance issues in OpenClinica 3.1.2
    We have OC3.1.1 and OC3.1.2 instances. We experience that OC3.1.2 is slower to load the page than OC3.1.1
    Thanks
    May
    -----Original Message-----
    On Behalf Of Cuneyt Parlayan
    Sent: Monday, January 30, 2012 3:30 AM
    To: [email protected]
    Subject: [Users] Performance issues in OpenClinica 3.1.2
    Hi all,
    We are having some performance problems in 3.1.2 which was not the case in earlier versions.
    When data is entered, it takes ± 5 seconds to open the window and another
    5 seconds to save the data.
    This was not the case before.
    Anyone else experiencing this?
    Thanks, Cuneyt.
    --
    Cuneyt Parlayan
    Datamanager
    Department of Pathology
    VU University Medical Center
    Amsterdam - The Netherlands
  • kristiakkristiak Posts: 1,334 ✭✭✭
    Hi May,
    I'll give it some further thought but unfortunately not until Thursday since
    I'm travelling
    Regards
    Krister
    -----Original Message-----
    On Behalf Of Xi, Xuemei
    Sent: 06 February 2012 15:11
    To: [email protected]
    Subject: Re: [Users] Performance issues in OpenClinica 3.1.2
    Hi Krister,
    Thank you so much for thinking about my problem. I do not know what does
    this mean:
    But first of all I would try to get rid of the division of form 1 in two
    depending on the selection of Other
    Maybe you send me a mock attachment picture?
    This form is used for initial 24 hrs admission. But it might be in two days.
    That is why I left the DAY there.
    Thanks a million for your advice
    May
    -----Original Message-----
    On Behalf Of Krister Kristianson
    Sent: Saturday, February 04, 2012 10:47 AM
    To: [email protected]
    Subject: Re: [Users] Performance issues in OpenClinica 3.1.2
    Hi May,
    I have loaded your form on a much faster device and tested it with 20
    patients. The performance was still excellent. The form opened in about 1
    second and saved in 4-5 seconds regardless of 1 or 20 patients.
    Have you had a chance to redesign the form yet? I have looked into it but
    it is difficult when you have not seen the protocol. But first of all I
    would try to get rid of the division of form 1 in two depending on the
    selection of Other Location. The I would make each day a separate event,
    that mean that you could skip the date for each record....would that work?
    But as I said I'm not sure as I said. How many days is the study with these
    recording going to continue.
    Best regards
    Krister
    -----Original Message-----
    On Behalf Of Xi, Xuemei
    Sent: 30 January 2012 14:29
    To: [email protected]
    Subject: Re: [Users] Performance issues in OpenClinica 3.1.2
    We have OC3.1.1 and OC3.1.2 instances. We experience that OC3.1.2 is slower
    to load the page than OC3.1.1
    Thanks
    May
    -----Original Message-----
    On Behalf Of Cuneyt Parlayan
    Sent: Monday, January 30, 2012 3:30 AM
    To: [email protected]
    Subject: [Users] Performance issues in OpenClinica 3.1.2
    Hi all,
    We are having some performance problems in 3.1.2 which was not the case in
    earlier versions.
    When data is entered, it takes ± 5 seconds to open the window and another
    5 seconds to save the data.
    This was not the case before.
    Anyone else experiencing this?
    Thanks, Cuneyt.
    --
    Cuneyt Parlayan
    Datamanager
    Department of Pathology
    VU University Medical Center
    Amsterdam - The Netherlands
This discussion has been closed.