We hope you'll join us for our 4/23 webinar on using data tables to apply reference ranges and AE codes in OC4. For more information and to register, visit https://register.gotowebinar.com/register/2882170018956684555

Show Hide Rules

Hi,
Can anyone send, or point me in the direction of, an example 3.1 rule file that uses and/or ?
I'm a bit confused over the format of the and tags.
Thanks,
Dave

Comments

  • DJudgeDJudge Posts: 35
    Hi,
    Can anyone send, or point me in the direction of, an example 3.1 rule file that uses ShowAction and/or HideAction?
    I'm a bit confused over the format of the DestinationProperty and ValueExpression tags.
    Thanks, Dave
  • kristiakesourcekristiakesource Posts: 133
    Hi David,
    Here are couple of examples from the early days of 3.1 . The simple rules
    does not work with groups but work fine in simple cases.
    Regards
    Krister
    -----Original Message-----
    On Behalf Of David Judge
    Sent: 18 May 2011 09:56
    To: [email protected]
    Subject: [Users] Show Hide Rules
    Hi,
    Can anyone send, or point me in the direction of, an example 3.1 rule file
    that uses ShowAction and/or HideAction?
    I'm a bit confused over the format of the DestinationProperty and
    ValueExpression tags.
    Thanks, Dave
  • DJudgeDJudge Posts: 35
    Thanks Krister,
    those examples are good if you are implementing show/hide within the CRF definition XLS spreadsheet
    but I was after a Rule example - where the show/hide is implemented in a Rule XML file.
    Cheers,
    Dave
    -----Original Message-----
    Sent: 18 May 2011 12:33
    To: [email protected]
    Subject: Re: [Users] Show Hide Rules
    Hi David,
    Here are couple of examples from the early days of 3.1 . The simple rules does not work with groups but work fine in simple cases.
    Regards
    Krister
    -----Original Message-----
    On Behalf Of David Judge
    Sent: 18 May 2011 09:56
    To: [email protected]
    Subject: [Users] Show Hide Rules
    Hi,
    Can anyone send, or point me in the direction of, an example 3.1 rule file that uses ShowAction and/or HideAction?
    I'm a bit confused over the format of the DestinationProperty and ValueExpression tags.
    Thanks, Dave
  • Paul GalvinPaul Galvin Posts: 886
    Hi David,
    Here is a URL where you can download sample CRFs and rules to utilize
    Show and Hide.
    https://wiki.openclinica.com/doku.php?id=developerwiki:oc31beta2#running
    _the_beta
    As you will see, these examples are from beta2 so you might experience
    some problems. We are putting together some other samples that will be
    available shortly.
    Thanks,
    Paul
    -----------------------------------------------------------------------
    Paul J. Galvin
    Project Manager
    OpenClinica
    781-547-8425
    Register for the 2011 OpenClinica Global Conference | May 8-9 | Boston
    www.openclinica.com
    Open Source Platform for Clinical Research
    -----Original Message-----
    [mailto:[email protected]] On Behalf Of David Judge
    Sent: Wednesday, May 18, 2011 9:47 AM
    To: [email protected]
    Subject: Re: [Users] Show Hide Rules
    Thanks Krister,
    those examples are good if you are implementing show/hide within the CRF
    definition XLS spreadsheet
    but I was after a Rule example - where the show/hide is implemented in a
    Rule XML file.
    Cheers,
    Dave
    -----Original Message-----
    [mailto:[email protected]] On Behalf Of Krister Kristianson
    Sent: 18 May 2011 12:33
    To: [email protected]
    Subject: Re: [Users] Show Hide Rules
    Hi David,
    Here are couple of examples from the early days of 3.1 . The simple
    rules does not work with groups but work fine in simple cases.
    Regards
    Krister
    -----Original Message-----
    [mailto:[email protected]]
    On Behalf Of David Judge
    Sent: 18 May 2011 09:56
    To: [email protected]
    Subject: [Users] Show Hide Rules
    Hi,
    Can anyone send, or point me in the direction of, an example 3.1 rule
    file that uses ShowAction and/or HideAction?
    I'm a bit confused over the format of the DestinationProperty and
    ValueExpression tags.
    Thanks, Dave
  • DJudgeDJudge Posts: 35
    That's great, thanks Paul.
    Dave
    -----Original Message-----
    Sent: 18 May 2011 15:08
    To: [email protected]
    Subject: Re: [Users] Show Hide Rules
    Hi David,
    Here is a URL where you can download sample CRFs and rules to utilize
    Show and Hide.
    https://wiki.openclinica.com/doku.php?id=developerwiki:oc31beta2#running
    _the_beta
    As you will see, these examples are from beta2 so you might experience
    some problems. We are putting together some other samples that will be
    available shortly.
    Thanks,
    Paul
    -----------------------------------------------------------------------
    Paul J. Galvin
    Project Manager
    OpenClinica
    781-547-8425
    Register for the 2011 OpenClinica Global Conference | May 8-9 | Boston
    www.openclinica.com
    Open Source Platform for Clinical Research
    -----Original Message-----
    [mailto:[email protected]] On Behalf Of David Judge
    Sent: Wednesday, May 18, 2011 9:47 AM
    To: [email protected]
    Subject: Re: [Users] Show Hide Rules
    Thanks Krister,
    those examples are good if you are implementing show/hide within the CRF
    definition XLS spreadsheet
    but I was after a Rule example - where the show/hide is implemented in a
    Rule XML file.
    Cheers,
    Dave
    -----Original Message-----
    [mailto:[email protected]] On Behalf Of Krister Kristianson
    Sent: 18 May 2011 12:33
    To: [email protected]
    Subject: Re: [Users] Show Hide Rules
    Hi David,
    Here are couple of examples from the early days of 3.1 . The simple
    rules does not work with groups but work fine in simple cases.
    Regards
    Krister
    -----Original Message-----
    [mailto:[email protected]]
    On Behalf Of David Judge
    Sent: 18 May 2011 09:56
    To: [email protected]
    Subject: [Users] Show Hide Rules
    Hi,
    Can anyone send, or point me in the direction of, an example 3.1 rule
    file that uses ShowAction and/or HideAction?
    I'm a bit confused over the format of the DestinationProperty and
    ValueExpression tags.
    Thanks, Dave
This discussion has been closed.