We hope you'll join us for our 4/23 webinar on using data tables to apply reference ranges and AE codes in OC4. For more information and to register, visit https://register.gotowebinar.com/register/2882170018956684555

Display problem in CRF with repeating groups inGRID layout, in OC 3.1.2

GerbenRienkGerbenRienk Posts: 818 ✭✭✭
Hi Leon,
No, I don't think that's possible. Or to rephrase that: I have never been
able to use a HideAction on a Group.
Kind regards,
Gerben Rienk
-----Oorspronkelijk bericht-----
Van: [email protected] [mailto:[email protected]]
Namens Iersel, L. van
Verzonden: dinsdag 21 februari 2012 15:06
Aan: [email protected]
Onderwerp: Re: [Users] Display problem in CRF with repeating groups inGRID
layout, in OC 3.1.2
Hi Gerben Rienk,
Is it also possible to hide a group again once it's shown. I've written an
HideAction Rule but it doesn't work.
GR. Leon
-----Original Message-----
On Behalf Of Gerben Rienk
Sent: dinsdag 21 februari 2012 14:27
To: [email protected]
Subject: Re: [Users] Display problem in CRF with repeating groups in GRID
layout, in OC 3.1.2
Yes, that is correct.
-----Oorspronkelijk bericht-----
Van: [email protected] [mailto:[email protected]]
Namens Cuneyt Parlayan
Verzonden: dinsdag 21 februari 2012 12:45
Aan: [email protected]; [email protected]; [email protected];
[email protected]
Onderwerp: Re: [Users] Display problem in CRF with repeating groups in GRID
layout, in OC 3.1.2
Hi Gerben,
Thanks for your mail!
A question about your workaround:
Do you suggest that the group must have a HIDE status and there should be a
rule written to let it get shown?
Thanks again, Cuneyt.
On Tue, Feb 21, 2012 at 11:35 AM, Gerben Rienk wrote:
> > Hello Cuneyt,
> >
> > You are seeing https://issuetracker.openclinica.com/view.php?id=10551
> > Until this is fixed try the setup as described at
> > http://trialdatasolutions.com/tds/howto/defaultrepeatingitems.jsp
> > and skip the part about the insertactions.
> > Hope this helps,
> >
> > Gerben Rienk
> > http://trialdatasolutions.com
> >
> > -----Oorspronkelijk bericht-----
> > Van: [email protected]
> > [mailto:[email protected]]
> > Namens Cuneyt Parlayan
> > Verzonden: dinsdag 21 februari 2012 10:32
> > Aan: [email protected]; [email protected]; [email protected];
> > [email protected]
> > Onderwerp: [Users] Display problem in CRF with repeating groups in
> > GRID layout,in OC 3.1.2
> >
> > We are having a display problem in one of our CRF's.
> > The CRF contains group definitions with repeating GRID layout.
> > It is displayed correctly when it is done in "view default".
> > But, it is displayed in an unusable wrong format when used for
> > entering data.
> > See the screen shots and the CRF excel sheet.
> > Anyone experiencing problems with repeating groups?
> > Best, Cuneyt.
> >
> > --
> > Cuneyt Parlayan
> >
> > Datamanager
> > Department of Pathology
> > VU University Medical Center
> > Amsterdam - The Netherlands
> >
> >
This discussion has been closed.