Home› Users Mailing List
We are currently working on the forum. For the short-term, all forum content will be in read-only format. We apologize for the interruption and look forward to collaborating with you shortly. All the best in your research!

Ref:Open clinica

baithibaithi Posts: 4 ✭
in Users Mailing List
Hi,
To install Open clinical what type of processor is required because while installing JDK version 1.4.2.12,plz let me know the exact requirements
--
Thanks
Srinivas Baithi
09290680020

Comments

  • Cal CollinsCal Collins Posts: 111 ✭
    Srinivas,

    Our system requirements are listed on the followng page:
    http://www.openclinica.org/page.php?pid=133

    We do not specify a minimum processor requirement.

    Small installations will run on hardware without needing much horsepower, but it depends what you plan to do (how much data and how many users it needs to support). It is possibly to install and run OpenClinica on an average desktop or laptop. Of course I would recommend more than that for a typical multi-user production implementation. We perform our internal testing and development on two primary machines, one with a 3.06 GHz/Xeon processor and the other with a 3.06 GHz/256KB Cache Intel Celeron D.

    Best,
    Cal
    Sent: Wednesday, September 05, 2007 10:07 PM
    To: [email protected]
    Subject: [Users] Ref:Open clinica
    Hi,
    To install Open clinical what type of processor is required because while installing JDK version 1.4.2.12,plz let me know the exact requirements
    --
    Thanks
    Srinivas Baithi
    09290680020
  • baithibaithi Posts: 4 ✭
    This is baithi, am trying to install openclinica in my own pc but am not able to do it since a long time,as per the instructions am insatlling the following softwares
    jdk-1_5_0_12-windows-i586-p
    jakarta-tomcat-5.0.28
    postgresql-8.2.4-1
    OpenClinica-1.1
    and to install all the above softwares i followed instructions also. even though am not getting proper result, even am gettting open page when with browser but it is giving username and password are wrong,whereas username is root and password is 12345678.
    whether should i have internet connection for this or if not what will be the solution.
    whether above softwares are enough or if any other versions are required.
    can anyone send me the detailed documentation how to go head ,
    Thanks in Advance.

    Baithi
  • Yufang WangYufang Wang Posts: 95
    If you only want to use OpenClinica on your own machine, you do not need internet connection.

    For your listed software packages, OpenClinica-2.0.1 is recommended. It can be downloaded from http://openclinica.org/page.php?pid=40 . Along with the package, an installation guide is available as well.

    A new version, OpenClinica-2.2, will be released soon.


    Yufang Wang
    Akaza Research
    400 One Kendall Square
    Cambridge, MA 02139
    tel: 617.621.8585 x.26
    www.akazaresearch.com
    www.openclinica.org
    Open Source Platform for Clinical Research
    ~ OpenClinica Enterprise ~ Ask me about professional training, support, and services for OpenClinica
    Sent: Tuesday, September 25, 2007 12:04 AM
    To: [email protected]
    Subject: [Users] ref:open clinica

    Hi,
    This is baithi, am trying to install openclinica in my own pc but am not able to do it since a long time,as per the instructions am insatlling the following softwares
    jdk-1_5_0_12-windows-i586-p
    jakarta-tomcat-5.0.28
    postgresql-8.2.4-1
    OpenClinica-1.1
    and to install all the above softwares i followed instructions also. even though am not getting proper result, even am gettting open page when with browser but it is giving username and password are wrong,whereas username is root and password is 12345678.
    whether should i have internet connection for this or if not what will be the solution.
    whether above softwares are enough or if any other versions are required.
    can anyone send me the detailed documentation how to go head ,
    Thanks in Advance.

    Baithi
  • marysilvaramosmarysilvaramos Posts: 1
    Yes until 1 pm

    Thanks,

    Maricruz Silva-Ramos
    DB Analyst
    Diabetes Reseach Institute
    1450 NW 10th Ave Room 1051G
    Miami Fl 33136

    Phone Number: (305) 243-3466

    Keep swimming, Keep swimming

    Opportunities come by creation, not by chance.

    Happiness is not a destination, it's a journey. Happiness is not tomorrow, it is now. Happiness is not a dependency, it is a decision. Happiness is what you are, not what you have.
    Sent: Tuesday, September 25, 2007 9:07 AM
    To: [email protected]; [email protected]
    Subject: RE: [Users] ref:open clinica

    Hello Baithi,

    If you only want to use OpenClinica on your own machine, you do not need internet connection.

    For your listed software packages, OpenClinica-2.0.1 is recommended. It can be downloaded from http://openclinica.org/page.php?pid=40 . Along with the package, an installation guide is available as well.

    A new version, OpenClinica-2.2, will be released soon.


    Yufang Wang
    Akaza Research
    400 One Kendall Square
    Cambridge, MA 02139
    tel: 617.621.8585 x.26
    www.akazaresearch.com
    www.openclinica.org
    Open Source Platform for Clinical Research
    ~ OpenClinica Enterprise ~ Ask me about professional training, support, and services for OpenClinica
    Sent: Tuesday, September 25, 2007 12:04 AM
    To: [email protected]
    Subject: [Users] ref:open clinica

    Hi,
    This is baithi, am trying to install openclinica in my own pc but am not able to do it since a long time,as per the instructions am insatlling the following softwares
    jdk-1_5_0_12-windows-i586-p
    jakarta-tomcat-5.0.28
    postgresql-8.2.4-1
    OpenClinica-1.1
    and to install all the above softwares i followed instructions also. even though am not getting proper result, even am gettting open page when with browser but it is giving username and password are wrong,whereas username is root and password is 12345678.
    whether should i have internet connection for this or if not what will be the solution.
    whether above softwares are enough or if any other versions are required.
    can anyone send me the detailed documentation how to go head ,
    Thanks in Advance.

    Baithi
This discussion has been closed.